(HEAA, HEA, HEB, HEM) High selection of H-Profiles, size up to 1000 mm. Unique length range! Length up to 24 m from stock…
Learn moreHigh selection of INP Beams. Size up to 500, length up to 18 m, and grades: S235JR / S275JR / S355J2, acc. to…
Learn moreHigh selection of IPE Beams in size up to 600, length up to 24 and grades: S235JR / S275JR / S355J2, acc.…
Learn moreHigh selection of UNP Channels. Size up to 400, length up to 18 m, and grades: S235JR / S275JR / S355J2, acc.…
Learn moreUPE Channels acc. to DIN 1026-2 standard are similar to UNP Channels acc. to DIN1026, but they have paralell flanges. High selection of…
Learn moreDimensions and shapes: Available sizes: 34-80 mm Wall thickness: 1,5-2 mm Length: 6000 mm Grade: S235JR
Learn moreHeat-resistant steels P295GH (1.0481) és P355GH (1.0473)acc. to DIN EN 10028 part 2, with inspection certificate acc. to DIN EN…
Learn moreHeavy plates in unalloyed or low alloyed grades Heavy plates acc. to EN 10025-2, tolerances acc. to EN 10029, class…
Learn moreAbrasion Resistant Steels ASH 80 (Semi-Manax),Wear resisting plates with 200-260 HB with inspection certificate acc. to DIN EN 10204/ 3.1…
Learn moreMelegen hengerelt táblalemezek ötvözetlen és gyengén ötvözött minőségben MH táblalemezek EN 10025-2 szerint, tűrések EN 10051 szerint S235JR / S355J2…
Learn moreQuenched and tempered fine grain steels S690 QL 1 (1.8988) / S690 QL (1.8928)acc. to DIN EN 10025 part 6,…
Learn moreSteel sheets in unalloyed or low alloyed grades Cold-rolled steel sheets acc. to EN 10130, tolerances acc. to EN 10131…
Learn morePremium surface quality for your thin sheet products Cold-rolled or zinc-coated sheet is coated with various paints or films, depending…
Learn moreacc. to DIN 536 with 690 N /qmm minimum strength Crane rails A 45 – 120 mm Length 12 m By arrangement…
Learn moreAngle bars (equal) from size 10x3-to size 150x60 mm in grades: S235JR / S355J2 acc. to DIN EN 10056. Test report…
Learn moreFlat bars on stock from size 10x3 mm to size 150x60 mm in grade: S235JR / S355J2 acc. to DIN EN…
Learn moreRound bars between 6-380 mm in grade S235JR / S355J2 acc. to DIN EN 10060. Test report EN 10204 3.1 with CE mark.…
Learn moreSmall sized UNP-Channels from size 30x15 to size 65 mm acc. to DIN 1026/EN Test report acc. to EN 10204 with…
Learn moreSquare bars from stock between size 6-160 mm in grade: S235JR / S355J2 acc. to DIN EN 10059. Test report…
Learn moreT-bars from stock between size 20x20x3 and size 140x140x15 mm, grade: S235JR / S355J2 acc. to DIN EN 10055. Test report acc.…
Learn moreWe deliver our unequal angle bars beetween size 30x20x3 and 250x90x16 mm in grades: S235JR / S355J2 acc. to DIN EN…
Learn moreUniversal flat bars from size 160x5 to 500x40 mm in grade: S235JR / S355J2 acc. to DIN 59200. Test report acc.…
Learn more